Zippity Outdoor Products ZP19003 Newport Finishing No Dig Vinyl Post 3 Tall ...

Description

Zippity Outdoor Products ZP19003 Newport Finishing No Dig Vinyl Post 3 Tall ...
This No-Dig finishing post is designed to be used with the Newport gate (ZP19004) or to terminate your fence run when installing The Newport Vinyl fence (ZP19002). To install your fence posts, use a sledge hammer to drive the steel pipe into the ground and sleeve your vinyl post over top. Please note that this fence is designed to be permanent and is not easily removed once installed.
Finishing Post with No-Dig Anchor Kit
The Benefits of No-Dig Fencing
No digging holes
No tearing up your yard
No pouring concrete
Permanent fence post is not easily removed once installed
This product is designed for Newport Fence/Gate (ZP19002/ZP19004)
See our website for installation instructions, line drawings & dimensions.
No-Dig Vinyl Fence Post & Anchor Kit
You will more than likely need to use this finishing post to terminate your fence run. Once the post is straight and level you will use the included drill bit to pre-drill through the post and anchor then you will drill the included screws into the post and anchor. Once this permanent fence post is installed, it is not easily removed without specialized equipment.
What's Included
1 vinyl post, 1 post cap, 1 steel no-dig anchor kit, 1 steel drill bit, 2 hex head steel screws.